Can the gear knobs be changed in the newer VE's?

[Bubbles86]

Ok, so Im guessing this has already been posted/asked before but I dont have anytime atm to look thru all the feeds on here... can only tell me if it is possible to change the gear knobs
only on the newer VE's??? Its an ISOTTA if that helps

 

[Reaper]

Ok, so Im guessing this has already been posted/asked before but I dont have anytime atm to look thru all the feeds on here... can only tell me if it is possible to change the gear knobs
only on the newer VE's??? Its an ISOTTA if that helps

I have an aftermarket shifter on my VE. I presume it'd be simple enough to put an aftermarket knob on top. No comment about the knob that operates the knob.

Reaper

 

[TinSnips]

It is possible.

 

[Bubbles86]

Is it overly hard?

 

[Reaper]

Pop shifter surround cover off, Undo the 4 screws that hold down the shifter boot, pop off the shifter from the shaft and then do the reverse for the new one.

Reaper

 

[Sabbath']

Pop shifter surround cover off, Undo the 4 screws that hold down the shifter boot, pop off the shifter from the shaft and then do the reverse for the new one.

Reaper

You forgot "Try not to knock yourself out when the old one comes loose"

Post 2k :surprise:

 

[bonners]

Yep I use a momo one

However on my new MGW shifter, I'm using a rip shift race knob

I'll post a pic when installed


Sent from my iPhone using Tapatalk

 

[cheesy_j]

U might have to be a little rough pulling the old one off but it does corn off

 

[Bubbles86]

So I've noticed there are 3 screws (installed using an allen key) with the knob... Is it still possible to replace?

 

[Ed]

stock one feels nice, what are you putting on instead?