TheIceman
Active Member
- Joined
- Mar 18, 2006
- Messages
- 658
- Reaction score
- 93
- Points
- 28
- Members Ride
- VY Ex-cop
still doing it, every time i start the car it faults to P0697. i have had multi meter on that circuit and its constant 4.983v on it, if i turn ignition off for 5 seconds and on again with fault cleared it wont come back, but if i turn ignition off for 15 seconds, after the ecu goes to standby and ref circuits have voltage turned off and goes to 0v and turn ignition on again it instantly sets P0697. but once cleared its all ok until next ignition cycle.
when driving the vehicle, if i go over around half throttle it sets P2138 all the time. i can not ever give this full throttle any more.
is it ecu fault ya reckon? or both ecu and accelerator pedal position sensor?
when driving the vehicle, if i go over around half throttle it sets P2138 all the time. i can not ever give this full throttle any more.
is it ecu fault ya reckon? or both ecu and accelerator pedal position sensor?