Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Code 81 - 2 - 3 Shift Control Solenoid 'B' Fault - Auto Transmission Only

sanctity

New Member
Joined
Jan 14, 2007
Messages
3
Reaction score
0
Points
0
Members Ride
vs statesman 5 ltr
how hard is this to fix anyone have any ideas pls its in a vs statesman v8
 

94 Stato V8

Member
Joined
Jun 13, 2006
Messages
52
Reaction score
0
Points
6
Location
Riverland
Members Ride
2010 VE Series 11 wagon, 2014 VF SV6 Storm Ute
Just had a very similar problem with my stato.
Hey before I go any further, hows the varitronic steering? has that stopped too?

Check fuse 12 if thats stopped and it should fix the trans too.

Failing that pull the trans pan and Ohm check the solenoids, specs are in the workshop manual.

Tim
 

sanctity

New Member
Joined
Jan 14, 2007
Messages
3
Reaction score
0
Points
0
Members Ride
vs statesman 5 ltr
Code 81 - 2 - 3 Shift Control Solenoid 'B' Fault - Auto Transmission Only

had this replaces by shop and engine ligh keeps comming on had it back to shop 3 times and they say they reset comuter and it is fine for day or 2 then comes back on getting very anoyed with only hacving 3rd gear lol
 

Doctor Bob

Grandpa
Joined
May 23, 2004
Messages
2,792
Reaction score
61
Points
48
Location
Retired
Members Ride
RG. Colorado & Caravan
its either going to be the solenoid or the wiring harness in the trans
 

sanctity

New Member
Joined
Jan 14, 2007
Messages
3
Reaction score
0
Points
0
Members Ride
vs statesman 5 ltr
solenoid was replaced is there any way i can check the wiring myself befor send back to shop and waist more $$$
 

shinagami2227

New Member
Joined
Nov 14, 2008
Messages
27
Reaction score
3
Points
0
Location
Melbourne, Vic
Members Ride
VS Executive S2 3.8lt V6 Ecotec
http://forums.justcommodores.com.au...86191-recurring-2-3-shift-solenoid-fault.html

Try this tread I had the same problem (2/3 kept going and it turned out the little electrical clip to the solenoid on the wiring harness had broken. If this is what happened to u it was probably caused by the mechanic being too rough as the wiring harness is quite fragile. Make them pay for replacement if that is whats wrong.

Cheers hope the link helps.
 
Top