!Complete list of things for vr v6 manual conersion?

[slappedvr]

hey guys
im looking at converting my vr v6 to manual and was just wondering what parts i would need.
ALL parts would be a great help.
cheers

 

[cander24]

Ok i'll make a start and list what I can think of:
T5 5 speed box (make sure its a V6 box as it has a longer input shaft than V8), V6 bellhousing, manual pedal box, V6 clutch fork, V6 clutch cable, pressure and clutch plate, thrust race, 8 bolt flywheel, oilite spigot bush, manual pcm or a manual tune burnt to you memcal, manual engine harness (or modify existing auto harness), T5 shifter and knob, manual plastic console insert, manual tailshaft and front yoke, manual gearbox crossmember.
There's probably a few bits i've forgotten but that's a start for you anyway

 

[Bizmark]

Looks like cander24 has covered most of it, you'd also need a manual starter motor i think. You can get away with just the front half of a manual tailshaft, the rear half should be the same as an auto so the front half would bolt up to your existing rear half of the auto tailshaft.

 

[ashleysnep]

Go to the how to section and look for the manual conversion thread where the first page includes a list of all you need!