Crewman mudflaps

[PeterK3127]

Having trouble locating tub mudflaps for my VZ Crewman 9CI. Have got a set from the Lions Den in SA, which weren't correct. The part number is GM 92172832. Anyone got any ideas?

 

[figjam]

https://www.ebay.com.au/p/2109110683#ProductDetails ................. part number 92144133, but shown as sold out.

I was after a set of moulded front mud flaps for the Cross6, which have the guard extension flares, and told the supplier that you used, what I wanted were specific to AWD models ..................... "Yep, genuine, definitely have those".
When they turned up the flaps were 92144132 > VY S and SS front. Nowhere near what I wanted. Still have them in the plastic.
The computer states it fits, therefore I must be wrong.

 

[Fu Manchu]

Might be a good one for spares. Set off front and back.

 

[Fu Manchu]

I know on base model crewman, the front is the same as Exec sedan and Statesman.

Rear is not available new. I will have a look for a part number on mine but wreckers will be the only place.

Is it an S or SS? With skirts or without?

 

[figjam]

Here's a bargain at just under $1,000 each ....
https://www.ebay.com.au/itm/3735320...MIn-_Dvcq-_gIV2XR9Ch32EQu1EAQYCyABEgK6TPD_BwE

 

[PeterK3127]

The Crewman is a 9CI VZ which has standard skirts which appear to be the same as the VS skirts. It's should be a S but it's not.
Those bargain $1000 each mud guard are what I was supplied, can't even modify them to fit.
Have tried a couple of wreckers found a passenger side one, but the drivers side is what I'm after.

 

[PeterK3127]

Sorry I meant VY not VS

 

[Fu Manchu]

VY and VZ are the same across all models for those sorts of parts.

 

[Fu Manchu]

Base model has no skirts.
S and SS have skirts like those in the linked picture.

 

[krusing]

I bought a set of universal ones for the Adventra,
and were flexible enough and fitted ok, didn’t need to trim them.
They don’t look too bad.


https://www.ebay.com.au/itm/3736248...rdzx3ovS8u&var=&widget_ver=artemis&media=COPY