Difilippo Extractors

[Harris]

Is it true Difilippo extractors are allot closer to the floor then any other extractor eg pacey xforce. I need to go 4 into 1s but seen so many low cars with them scrape through.

Any ideas???

 

[Munz]

I could possibly take a pick for you (let me know) but you could try sureflo shorties if your worried about scraping

 

[Harris]

Yer can u pm me a pic thanks mate

 

[axemurderer101]

Mine are pretty low and so is the twin 3 catback lol

 

[Lumps of cheese]

Yes they hang lower. Paceys tuck up nice, mine never scrapes.

 

[scott w]

i have 1 7/8 pacies with super lows and have never had them scrape

 

[Surfwagon]

I have sure flow shorties with Ballistic cats coupled to the HSV 3"secondary pipes.

 

[JacksHSV]

Yea, my DiFilipo 4-1s are lower than most I've seen. Lowest point under my car actually. There's a small dent on them but to be honest they're so close to the front wheels that they always clear speed bumps no worries. I'll take some photos tomorrow if you like.

 

[Munz]

I have sure flow shorties with Ballistic cats coupled to the HSV 3"secondary pipes.

Surf: Drivers side flange looks real close to the chassis rails - does it rub?


Also to the OP: my pics turned out **** but I can definitely get my hand around the header outlet pipe so I think theres a little room to gain but I don't scrape my extractors I sometimes scrape my cats

 

[Surfwagon]

I can still put my fingers between the flange and the chassis rail and there would be no trouble with heat as its only the bolt wing that is close not the actual main flange plate.
When the shorties were fitted the flanges were rotated to give maximum access to all areas and the transmission although its still tight but no where as tight as with full size long 4 into 1's fitted.