dump rear end vs ute

[spotamous]

hey everyone, just put 20'' sigs on my ute and i lowered the rear with ssl king springs, and its slighty tucking the tyre, ive seen some other vs wagons and sedans and there tucking alot more than mine, and my ute is just about siting on the bumpstop mounts, about 10mm off.
just wanting to know if theres anyway it could go lower, thanks.

 

[SUSVS]

Some say cut the bump stops n some say buy smaller bump stops, but I'd say air bag the rear end n it will tuck how ever much u want

 

[jesse_lankey]

airbag it or get some sssl springs but you will defiantly need shortened bump stops and you wont be able to carry a lot of weight

 

[spotamous]

at the moment it has no bumstops at all, haha pretty rough ride

 

[VL-187]

u'll find that most vr/vs sedans that r REALLY slammed r using barina, camira, daewoo, torana or bmw springs.. for irs that is

where did u buy the 20" sigs from?? been tryna track down a set but can only find 2nd hand..

 

[spotamous]

one of my mates in melb, ill ask him what joint next time i see him

 

[justbad4you]

at the moment it has no bumstops at all, haha pretty rough ride

get pedders super low bumpstops

 

[commycrew]

Get some rear sedan SSSL springs (sedan springs are lower than ute ones), you wont be able to have bump stops because it will be metal on metal. I had that on my ute for about 6 months, was soo low, by far one of the lowest around, but the ride is absolutely terrible. So I guess you have to ask yourself, height for comfort....