Engineering Mode in the new Commodore ?

[theskull]

hi ,
how could I find the engineering mode which allows me to see trans temp, engine temp and oil pressure ?
in the new interior the buttons are little bit different, Im wondering if any one knwos ?
thank you,,,,​

 

[PIR4TE]

There have been threads that touched on this BTW, no result. $100 bluetooth dongle from Target gets you all that and more.

 

[aussieakito]

For VE: Engineering mode is entered, by switching the ignition on while pressing the ENTER button.
It shows you
Software Version
GM Part Number
Battery Voltage
Remaining Fuel (Lts)
Instantaneous Fuel (Lts)
Coolant Temperature
Speed (km/h)
Tacho (rpm)
Tyre Pressure
Engine Oil Life (%)
Park Lamps (on/off)
Steering Wheel Switch Voltage
Display of Gears (commanded)
Throttle Position Requested (pedal %)
Transmission Sump Temperature (°C)
Self Test


As for VF there is none, you need a scan tool of some sort

 

[phillmac]

I use a cheap ebay dongle thing connected to torque pro phone program. Works well enough but some dash features don't display even though the green spot is on. eg oil preasure, ethol content in fuel if I put a tank of e10 in. Few others but can't remember. Have others found the same. Trying to work out if it's the car or program.