eurovox to pioneer!

[nghie]

on my pioneer, there is no wire to match up with batt twelve coming from the loom. From the pioneer, I've joined ignition twelve volt to accessories on the loom, yellow to constant and ground to black on the loom.

 

[nghie]

guys, I'll tell you what. When i get home I'll list the pioneer wiring diagram and then the vp eurovox wiring diagram. Rather than chase our tails, somebody can just tell me what should go where. . Seems like a more strategic plan!

 

[wraith]

Or you could of saved your self all this hassle bought the right harnesses to begin with boom done in 15 minutes.

 

[nghie]

Or you could of saved your self all this hassle bought the right harnesses to begin with boom done in 15 minutes.

Indeed, what you say is true. Although; I'd really rather leave everything stock. As in;

I take out my Pioneer DEH-5250SD from it's box (That I paid almost $450 for), and then wire it to the factory loom.

In any case; to those who would like to help, I will proceed to list the DEH-5250SD Wiring Diagram!

Yellow: Connect to the constant 12 V Supply Terminal.

Red: Connect to the terminal controlled by ignition switch (12V DC)

Orange/White: Connect to lighting switch terminal

Black: Connect to a clean, paint free metal location.



Now! I'll list the VN-VT Wiring Diagram; bar the speaker wires.

Accessory (12V) : Yellow

Battery (12V) : Orange/White

Dimmer In (12V) : Brown/White

Ground : Black/White

Constant (12V) output : Yellow/Red.




That is about as good as it gets; I guess. What wire goes where?



To all, thankyou for all of your help. It's much appreciated!

Dan.

 

[wraith]

Factory to Headunit as follows
Yellow to Red
Yellow/Red to Yellow
Black is obvious
Brown/White to Orange

Make sense now? Just a suggestion.. no need to be a smart ass mate

Lol 400?

 

[nghie]

Factory to Headunit as follows
Yellow to Red
Yellow/Red to Yellow
Black is obvious
Brown/White to Orange

Make sense now.

Thanks. I'll double check it tomorrow; but I'm sure that's how I had it wired..

Above all; I think I may just need to ground the unit directly to the chassis. That might help.

Thankyou again!

Dan.

 

[nghie]

Finally got the head deck working. It was wired correctly the whole time! Funny thing is; I took the liberty of skimming the User Manual; which pointed me in the direction of a "reset" button hidden on the deck.

Thanks to all who took the time to help me out.

Tomorrow I'll hopefully get around to installing the front and rear speakers; and setting up the connections for my Focal BUS-25 that will be arriving in the next week or two.

Until next time!

Dan.