RACE5L
Solid cammed
Hi All,
Cleaning out the shed of excess parts..
All parts listed are in good used condition.
LOCATION: All parts are located in Appin NSW 2560 (between Wollongong and Campbelltown)
POSTAGE: Postage is at the buyers expense.
PAYMENT: Payment accepted is cash, bank deposit, or paypal.
CONTACT: I can be contacted by replying here, PM, or 0458 722 355
------------------
ITEM: Holden V8 clutch fan, removed from VL Calais
PRICE: $50 ono
OTHER INFO: In good working order when removed, comes with mounting studs and block, freshly degreased, postage is around $30 from memory depending on area
------------------
ITEM: Holden V8 Trimatic flexplate cover/convertor shield x2
PRICE:$50 each
OTHER INFO: Good working order, one is clearanced around starter hole for Hi torque starter
------------------
ITEM: Holden VL V8 radiator
PRICE: $80
OTHER INFO: In good working order, will not post due to size, pickup only
------------------
ITEM: VL V8 trimatic/T350/M21 gearbox crossmember
PRICE: $50 firm
OTHER INFO: Hard to find
------------------
ITEM: VB/VC SLE rims, freshly sandblasted, set of 4
PRICE: $200 set
OTHER INFO: Tyres unroadworthy, otherwise excellent with all caps, have another 7 in used condition
------------------
ITEM: Factory VB-VL Oil pressure and Water temp gauge senders
PRICE: $10 each
OTHER INFO: Have plenty of both stockpiled but am going LS1 and aftermarket dash
------------------
ITEM: VB-VL boot carpet, floor only, no hump or beaver covers
PRICE: $20ono
OTHER INFO: Black marine style carpet, have 2
------------------
ITEM: VR-VS swaybar with near new Pedders bushes and link pins
PRICE: $40
OTHER INFO: Pickup only
------------------
ITEM: WH Statesman LS1 fuel tank with Fuel pump and cap
PRICE: $50
OTHER INFO: May seperate pump or fuel cap for right offer
------------------
ITEM: SLE/Statesman Chrome interior light with map lights
PRICE: $60
OTHER INFO: Comes with uncracked lens and partial loom
------------------
ITEM: VL Group A HDT copy grille
PRICE: $20
OTHER INFO: One of the two mounting bolts needs glueing hence low price
Cleaning out the shed of excess parts..
All parts listed are in good used condition.
LOCATION: All parts are located in Appin NSW 2560 (between Wollongong and Campbelltown)
POSTAGE: Postage is at the buyers expense.
PAYMENT: Payment accepted is cash, bank deposit, or paypal.
CONTACT: I can be contacted by replying here, PM, or 0458 722 355
------------------
ITEM: Holden V8 clutch fan, removed from VL Calais
PRICE: $50 ono
OTHER INFO: In good working order when removed, comes with mounting studs and block, freshly degreased, postage is around $30 from memory depending on area
------------------
ITEM: Holden V8 Trimatic flexplate cover/convertor shield x2
PRICE:$50 each
OTHER INFO: Good working order, one is clearanced around starter hole for Hi torque starter
------------------
ITEM: Holden VL V8 radiator
PRICE: $80
OTHER INFO: In good working order, will not post due to size, pickup only
------------------
ITEM: VL V8 trimatic/T350/M21 gearbox crossmember
PRICE: $50 firm
OTHER INFO: Hard to find
------------------
ITEM: VB/VC SLE rims, freshly sandblasted, set of 4
PRICE: $200 set
OTHER INFO: Tyres unroadworthy, otherwise excellent with all caps, have another 7 in used condition
------------------
ITEM: Factory VB-VL Oil pressure and Water temp gauge senders
PRICE: $10 each
OTHER INFO: Have plenty of both stockpiled but am going LS1 and aftermarket dash
------------------
ITEM: VB-VL boot carpet, floor only, no hump or beaver covers
PRICE: $20ono
OTHER INFO: Black marine style carpet, have 2
------------------
ITEM: VR-VS swaybar with near new Pedders bushes and link pins
PRICE: $40
OTHER INFO: Pickup only
------------------
ITEM: WH Statesman LS1 fuel tank with Fuel pump and cap
PRICE: $50
OTHER INFO: May seperate pump or fuel cap for right offer
------------------
ITEM: SLE/Statesman Chrome interior light with map lights
PRICE: $60
OTHER INFO: Comes with uncracked lens and partial loom
------------------
ITEM: VL Group A HDT copy grille
PRICE: $20
OTHER INFO: One of the two mounting bolts needs glueing hence low price
Last edited:
