Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

FS VS level 3 cluster upgrade and other parts

Andy68

2001 WH Statesman
Joined
Sep 8, 2006
Messages
47
Reaction score
1
Points
8
Members Ride
2001 WH Statesman
hi guys I have for sale a level 3 instrument cluster upgrade to suit a VS Commodore approx 240,000 on the clock and comes complete with patch loom( you need one of these to get the LCD screens working) and the trip computer.....this is the triple screen LCD, and the mode button replaces the speed alert....face is painted in gold......everything is there waiting for the conversion to be done....$100 the lot PM me or 0423 980 683...Andy

Also have the following...
1/. brand new belt pulley tensioner $40.00
2/.set of VT wing mirrors few scratches plugs have been cut for electrics but enough wire to put back on $20 the pair
3/. 1 x chemically cleaned throttle body standard 68mm $20.00
4/. pod filter setup consisting of pod filter reducers, piping, ribbed flexible hose and pipe sealing ring...$20.00 the lot.
5/.pair of VT factory side skirts burgundy no cracks need a clean $15.00 the pair
6/.VT commodore instrument cluster unsure if working good for someone wanting to fiddle $5.00
7/.set of 3 Vs door trims(drivers side front was cracked) good condition, no speaker pods...good for someone who wants to experiment with fibreglass...$15.00 the lot.
8/.1 x VS Acclaim sedan rear 3 piece seat, no rips, tears or burns, could do with a clean $15.00
9/.1 x 3.8 litre V6 engine cover, needs sanding back and painting great for someone wanting to try mods etc $5.00
10/. 1 x set of 4 VT executive door trims need a clean but door cards and armrest material is great no rips or tears $30.00 the set of 4(again great for someone wanting to attempt fibreglassing.)

Location:prospect SA
postage:will post at buyers expense Australia wide.
(will not post door trims side skirts or seats just too expensive so local pickup only on these)
Contact:pM me or 0423 980 683...Andy

cluster.jpg


mirrors.jpg


pulleytensioner.jpg


throttlebody.jpg


podfilter.jpg


VTsideskirts.jpg


vtcluster.jpg


Vsdoortrims.jpg


VSacclaimrearseat.jpg


enginecover.jpg


Vtdoortrims.jpg
 
Last edited:

Andy68

2001 WH Statesman
Joined
Sep 8, 2006
Messages
47
Reaction score
1
Points
8
Members Ride
2001 WH Statesman

chaos 8

New Member
Joined
May 8, 2008
Messages
49
Reaction score
0
Points
0
Age
40
Location
Coffs Harbour
Members Ride
VS 420hp 355 5spd
ill take the cluster and patch loom man pm me and ill transfer money asap!
 

Andy68

2001 WH Statesman
Joined
Sep 8, 2006
Messages
47
Reaction score
1
Points
8
Members Ride
2001 WH Statesman

Nevyn

Member
Joined
Jan 15, 2007
Messages
573
Reaction score
3
Points
18
Location
Latrobe Valley
Members Ride
VN Sedan
I thought the TB came in 60mm, 65mm, or 70mm sizes...never heard of 68mm? Is it standard or been bored out? What do u think postage will be to 3844?
 

Andy68

2001 WH Statesman
Joined
Sep 8, 2006
Messages
47
Reaction score
1
Points
8
Members Ride
2001 WH Statesman
no 68mm is standard m8 postage would be $8.00 via express post...Andy
 

Andy68

2001 WH Statesman
Joined
Sep 8, 2006
Messages
47
Reaction score
1
Points
8
Members Ride
2001 WH Statesman
I thought the TB came in 60mm, 65mm, or 70mm sizes...never heard of 68mm? Is it standard or been bored out? What do u think postage will be to 3844?

ECOTEC (Emissions & Consumption Optimisation TEChnology) V6


'V' configuration. Cold air intake. OHV design with cross flow cylinder heads. Sequential fuel injection. High energy distributorless, ignition. Twin knock-control sensors. Computer diagnostics. Electric cooling fan. Stainless steel exhaust. Triple Coils. Cross-bolted main bearings. 4 bolt.

Cylinders: 90-degree V6
Capacity: 3.791L
Bore x Stroke (mm): 97 x 86
Induction: Electronic sequential fuel injection.
Valvetrain: Overhead valves, pushrods, 2 valves / cylinder.
Throttle body diameter: 68mm
Compression ratio: 9.4 : 1
Maximum power: 152 kW @ 5200 rpm
Maximum torque: 305 Nm @ 3600 rpm
Redline / Cutout: 5600 / 5900 rpm
Recommended Fuel: 91 Octane (ULP)
 

Nevyn

Member
Joined
Jan 15, 2007
Messages
573
Reaction score
3
Points
18
Location
Latrobe Valley
Members Ride
VN Sedan
mmmm......must be an ecotec thing.....I'm sure mine is 60 or 65mm, but mine is a series 1 engine.....would a ecotec engine TB fit ok on the VN S1 engine?
 

Andy68

2001 WH Statesman
Joined
Sep 8, 2006
Messages
47
Reaction score
1
Points
8
Members Ride
2001 WH Statesman
No sorry bud, will fit ecotec engines only....you can go up to a VR throttle body only....Andy
 
Top