Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

fuse wiring

jamin

New Member
Joined
Jun 20, 2005
Messages
12
Reaction score
0
Points
0
Members Ride
VT 5.0L
i was just wondering where is the best place to run the fuse wire through th firewall and if anybody would be able to help me complete my install (i'll come to you)
 
B

bdcmedia

Guest
If you look down at the firewall on the battery side of the car, you will notice a round rubber boot with some wiring harnesses going into the centre of it. Just get a screwdriver and lever the side of the rubber boot and run your wire behind that. Just remember to keep levering the rubber away slightly from the side of the firewall as you will strip your wire as you pull it through if you dont!!

Hope this helps

Brett
 

Tasmaniak

Not a valid input....
Joined
Apr 30, 2005
Messages
8,094
Reaction score
131
Points
63
Age
41
Location
S.E. Melbourne
Website
www.ranjinstallations.com.au
Members Ride
VR Stato, C180 Kompressor, Prado and Ka
and when the wire rubs after being in there for several years?

Perhaps you should just snip an extra hole into the rubber boot and force you cable through that ;)
 

jamin

New Member
Joined
Jun 20, 2005
Messages
12
Reaction score
0
Points
0
Members Ride
VT 5.0L
thanx guys ill look at tonight and see how i go
 
Top