help install FOGLIGHTSs

[SweetWagon]

the black one dsnt look like a spacer its not one of them looking tremmals
its like a tube

cut it off and put a female spade on it then, make sure the wires are fed through the rubber grommet before attaching anything.

 

[MAC-VN]

ok i i put a female spade on the black on
n put the whit wire on the red
n the black on light panel tab
then i put the red power wire on the +side batty
n trying to click off n on nothing happened

btw i only had one light pluged in so
do i need both of them hooked up

 

[MAC-VN]

well anybody no

 

[MAC-VN]

cmon guys im tryed everything nothing seem to work

 

[MAC-VN]

ok guys see the black wire from the switch n
and the 2 other black wires from were the lights come
well i only have one wire from the box this the wire thats ment to hung outaa the wries from lights anit there

so i put the black wires on the - side of battery n the red wireon the +
and i put the black wires to the lights on the light panel tabs
and the white wires on the wires coming from the globes
then i clicked to turn it on ANFD NOTHING so i tryed puting black on the globes n white on the panel and nothing

and i ment to have the black earth wires on the -side battery

 

[SweetWagon]

ok guys see the black wire from the switch n
and the 2 other black wires from were the lights come
well i only have one wire from the box this the wire thats ment to hung outaa the wries from lights anit there

so i put the black wires on the - side of battery n the red wireon the +
and i put the black wires to the lights on the light panel tabs
and the white wires on the wires coming from the globes
then i clicked to turn it on ANFD NOTHING so i tryed puting black on the globes n white on the panel and nothing

and i ment to have the black earth wires on the -side battery

The black wires you have circled in the diagram with ring terminals need to be screwed down to the body. also the blue wire needs to get spliced into the high beams or a positive source for the relay to activate.

 

[MAC-VN]

ooooooooooooooooo
i didnt connect the blue wire ahaha thought i didnt need to
is the black wires ok to be on the -battery side or no

so were can i put the blue wire
man i owe u a chase of jim beam


cld i put the blue wire on the + baterry side

 

[SweetWagon]

ooooooooooooooooo
i didnt connect the blue wire ahaha thought i didnt need to
is the black wires ok to be on the -battery side or no

so were can i put the blue wire
man i owe u a chase of jim beam

Yep need the blue wire connected or nothing will work. You can tap it into virtually any positive source using that little clip the kit comes with, The brown wire behind the headlight would probably be easiest, as thats for the parking lights (your fog lights will then only be able to be switched on when your parking lights are on)

Yes will be fine to leave the black wires to the negative battery terminal.

Feel free to drop that case of beam to me

 

[SweetWagon]

Also make sure you insulate all the wiring joins (if any) with electrical tape

 

[MAC-VN]

were abouts u located mate

ok there was no clip for the blue wire shud i just the brown wire behinde headlight n wire the blue into it then tape it up?