Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Help needed, codes

Leathalwoman

New Member
Joined
Sep 10, 2010
Messages
2
Reaction score
0
Points
1
Location
Newcastle
Members Ride
Vs Clubsport
Hey there I recently brought a ve sv6 ute and it's coming up with these codes. It goes into limp mode. Clearing the codes and keeping it above 1500 revs and its fine but obv not a fix by any means was enough to drive it home.
The codes are as following
P0030
PO050
PO100
P0113
PO69E

Don't know anything much about the motors above the VS so any help would be greatly appreciated
 

lout

Well-Known Member
Joined
May 13, 2006
Messages
5,565
Reaction score
4,271
Points
113
Age
60
Location
Langwarrin Victoria
Members Ride
VXii Executive V6 , VYii Adventra LS1
Last edited:

Leathalwoman

New Member
Joined
Sep 10, 2010
Messages
2
Reaction score
0
Points
1
Location
Newcastle
Members Ride
Vs Clubsport
So looking at those codes looks like 02sensors, and possibly fuel pump? Can I have some advice as to what my next step should he please. Cheers
 

lout

Well-Known Member
Joined
May 13, 2006
Messages
5,565
Reaction score
4,271
Points
113
Age
60
Location
Langwarrin Victoria
Members Ride
VXii Executive V6 , VYii Adventra LS1
both upstream O2 sensor heaters not working so first step check power and grounds
fixed up original answer as 2 codes merged
maf sensor
intake air temp
and fuel pump
i would be investigating the ground connections carefully
make sure maf sensor is plugged in
 

krusing

Well-Known Member, Possibly for the wrong reasons
Joined
Jun 21, 2014
Messages
5,405
Reaction score
4,039
Points
113
Location
Melbourne, Bayside
Members Ride
2002 VY L67 Calais Sedan, 2012 VE L77 Calais Wagon
Personal checking and testing,
Above DTC diagnosis codes sounds like a common denominator !

As mentioned/listed above.
 
Top