horn issue

[rubaduckee]

hi guys I have changed my steering wheel and with a boss kit on a VP and there is only 1 wire from the boss kit for the horn and there ae connections on the button I have, is there supposed to be 2 wires in the boss kit?

thanks

 

[hi_ryder]

kinda vague... got pics? is it an after market your talking about?

 

[juiceie vh sle]

it should only have one wire going to the back. the metal lip of the horn pad is the earth

 

[VR38]

Two wires on the boss kit horn button, one from the factory wire and the other from the button to earth (the boss) to complete the circuit.

 

[rubaduckee]

sorry yea, its an afer market wheel, i tried plugging the single wire into the button and putting a wire from the other side of the button to a ground but still no luck

thanks again

 

[juiceie vh sle]

did you make sure the metal ring around the horn was touching earth

 

[VR38]

Try touching the factory wire directly to earth to test the horn and go from there.

 

[rubaduckee]

mmm, havnt tried that, will do

i presume the earth is the pin that pushes in at the back when the boss kit is pushed on, yes it is touching this

thanks again fellas

 

[rubaduckee]

ended up being faulty wire from the boss kit, so was easier to9 just get another boss kit, and works all fine now.

thanks for all help and input guys