Phillbert
Well-Known Member
- Joined
- Sep 21, 2016
- Messages
- 991
- Reaction score
- 1,274
- Points
- 93
- Location
- Gold Coast
- Members Ride
- VS L67 Ute, VX SS
1. Drop the steering wheel down and undo the 2 screw at top of cluster
2. Take off the dash fascia surround by unplugging the light switch first then the aircon plug and the other plugs depending which model you have.
3. Once the fascia is off you will have clear access to the cluster.
4. Undo the 2 screws where the white tabs are, these are the only 2 screws holding the cluster. Now you can pull the cluster out, it might take a bit of wiggling but it will just pop out.
5. Once the cluster is out turn it over and take out the 4 Torque screws (T10 size) if you don’t have a torque screw bit you might use a tiny screw drive to do the job.
6. Unclip the 2 white tabs and separate the cluster
7. Once separated turn it over and unclip the black lead with a small flat screw driver, undo the 4 black screws holding the speedo in place
8. Your speedo is ready to come out now. Carefully slide out the black dividers holding the speedo in place from the front
9. Now we need to pull the speedo apart, there are 2 flat head screws on the speedo face that need to be removed and the speedo needle, the needle you need to be very carefully not to break but it will pop off with a little pressure.
2. Take off the dash fascia surround by unplugging the light switch first then the aircon plug and the other plugs depending which model you have.
3. Once the fascia is off you will have clear access to the cluster.
4. Undo the 2 screws where the white tabs are, these are the only 2 screws holding the cluster. Now you can pull the cluster out, it might take a bit of wiggling but it will just pop out.
5. Once the cluster is out turn it over and take out the 4 Torque screws (T10 size) if you don’t have a torque screw bit you might use a tiny screw drive to do the job.
6. Unclip the 2 white tabs and separate the cluster
7. Once separated turn it over and unclip the black lead with a small flat screw driver, undo the 4 black screws holding the speedo in place
8. Your speedo is ready to come out now. Carefully slide out the black dividers holding the speedo in place from the front
9. Now we need to pull the speedo apart, there are 2 flat head screws on the speedo face that need to be removed and the speedo needle, the needle you need to be very carefully not to break but it will pop off with a little pressure.