Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

hq panelvan

white vn ss

New Member
Joined
Oct 25, 2005
Messages
729
Reaction score
0
Points
0
Age
35
Members Ride
vn ss
hey guys and girls

just wondering what i would have to do to be able to fit a injected 5 litre under the bonnet of a hq panelvan. any help is appreciated

cheers
rohan
 

Goon

Scientific Tuning
Joined
Feb 20, 2006
Messages
2,508
Reaction score
9
Points
38
Location
BrisVegas. QLD
Members Ride
VY CUSTOM.
I havent seen one of those in ages... You wouldnt have any pictures would you?

sorry for not being much of a helping hand but a panelvan :D
 

white vn ss

New Member
Joined
Oct 25, 2005
Messages
729
Reaction score
0
Points
0
Age
35
Members Ride
vn ss
pictures of a hq panelvan?
 

jimiemick

Member
Joined
Mar 24, 2006
Messages
101
Reaction score
0
Points
16
Members Ride
VR's
Yea Id also like to know this

some one reply for him
( im thinking HZ or HX ute tho )
 

vn88calais

Perth Representative
Joined
Jun 17, 2005
Messages
391
Reaction score
0
Points
0
Age
36
Location
Perth, Western Australia
Website
www.cardomain.com
Members Ride
VY Commodore 2002
hey guys, saw HQ & then the word PABELVAN, so i thought that i should have a look. apon reading a 5L fuel injected in one, i thort heck hadnt i seen one of those before, so i had a look on www.cardomain.com and i found it...
this one is a HX tho, but should still be a similar, if not exact, engine bay. hope it helps, link below
http://www.cardomain.com/ride/2199162
later Todd
 
H

HZ_Van

Guest
You would have to change the sump and oilpickup to a HQ-Z one (bump is in a different spot)
You would need to use HQ-Z V8 engine mounts.
Depending on Gearbox you would need to change the crossmember to suit
You may need to change the waterpump.
you will need to find suitable mounting locations for all sensors and wiring
you will need to install an EFI fuel pump and high pressure lines
you will need a return line to the fuel tank
you may need a surge tank or swirl pot.
if your running a complete VN type motor (not just the topend on an old block) you will need to comply with VN emmisions, including running cats

Theres a few other things you need to do, I am doing a similar conversion to my HX Sandman, its slow going, but its getting there.

Regards
- Adam
 

Whales

New Member
Joined
Feb 23, 2008
Messages
45
Reaction score
0
Points
0
Age
39
Location
Newcastle
Members Ride
Vs Series 3 Ute, manual. Hz Pano 5.0L injected
i think hz_van summed it up. i've got a 304 in my hz pano and thats what i had to change in it... except for the water pump i didn't change it. and i used a VL fuel pump for it aswell... goes hard but didn't sound as good as my worked 253..lol i'll put some pics up if you want cause i'm getting it painted and ive stripped the whole front off.
 

ViN3Y

V!N3Y
Joined
Aug 5, 2008
Messages
49
Reaction score
1
Points
0
Age
37
Location
Mildura, VIC
Website
www.myspace.com
Members Ride
97 HSV Clubsport
gotta agree with whales my mates got quite a few HQ to WB series sedans pannelvans utes tonnes and even monaros was prity much a straight change sept for the few parts HZ van mentioned but it doesnt compair to his HQ Ute with the 308 in it nothing like a bit of originality will try get some snappies of his car graveyard as it stand and the ute and monaros if ppl are interested
 
Top