Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Ignition for VN V6 on straight gas

colmiller

New Member
Joined
Oct 13, 2006
Messages
16
Reaction score
0
Points
0
I just bought a VN as a drive line donor for my HZ Kingswood project car.

I will be setting this car up to run only on LPG. At this stage the plan is to use Gas Research equipment.

What are my options as far as ignition goes ?

The gearbox is a T700R so that doesnt need computer assistance, I don't need it for fuel metering, the air con etc is Kingswood generation so I don't have to worry about managing that with electronics. Only the spark concerns me.

I would prefer to eliminate the computer altogether if there is a viable alternative.
 

Doctor Bob

Grandpa
Joined
May 23, 2004
Messages
2,792
Reaction score
58
Points
48
Location
Retired
Members Ride
RG. Colorado & Caravan
you can make the DFI run without anything else but it only runs at 10 degrees flat.
best option is to run the computer, that way the spark maps are all fully programmable

Rob
 

colmiller

New Member
Joined
Oct 13, 2006
Messages
16
Reaction score
0
Points
0
OK Dr Bob thanks for that. Any suggestions where I can find the pin outs I will need to wire up the computer for my limited application.
 
Top