JON3ZI's VN SS...

[FlawlessVNSS]

Hey Guys Been a member for a while just never found the time to post up some info for my car.

at the moment its pretty stock as i haven't had the time to do all the mods i would like to it.

but here is a list of what mods i will be doing to it in the near future.

Car: 1990 Holden VN SS

Paint: Atlas Grey

BodyKit: Factory SS

Engine: Rebuilt V8 5lt

EngineMods: - ACL Race Series Flat Top Pistions
- ACL Race Series Gasket Kit
- Torque Power High Rise Dual Plane Manifold
- EdelBrock 4 Barell 1000cfm Throttle Body
- Proflow Billet Fuel Injection Rail
- Bocsh High Flow Injectors
-

Transmission: - T56 6spd Manual Conversion
- hydralic Clutch Setup
- Aussie Racing Ripshifter

Exhaust: - 4 into 1 headers, high flow cat 3 inch single system with dual tip outlet.

Diff: - 4.11 LSD

Brakes: - Standard ss

Suspension: - Full Air Suspension Kit from AirRide

Wheels: - 20x8 GTS E3 wheels

Tyres: - 235/35/R20 Pireli Directionals (front)
- 235/35/R20 Pireli Drangons (Rear)

Interior: - Stock SS Interior Retrimed In Charcol Grey Velour with Red Stitching
- New Carpet and roof lining
- Dash and Door Trims Re covered in Charcol Grey with Candy Red Detailing
- Saas Water Temp, Vaccum, Oil Pressure and 5" Tacho

Sound System: - JVC 5.5inch In Dash Single Din Full Touch Screen DVD Player
- 2x JVC 7" Head Rest Monitors
- MTX Audio 300w 6" Front Speakers
- MTX Audio 600w 6x9" Rear Speakers
- MTX Audio 4 Channel 1200w Peak Speaker Amp
- MTX Audio 2 x 1500w - 3000w Peak Thunder Square Subs
- MTX Audio 3000w Peak Class D Mono Block Amp

and here are a few Photos of my pride and joy.

Cheers Adz..

 

[two-bit]

neeeeeds interior shot of dogey window switchs XD
we shall get there with this picking up the manual soon

 

[FlawlessVNSS]

lol just cause you jealous of my awesome backward switches.

 

[Dazz SSV ute]

Very tidy SS you ve got there mate , looks great

 

[FlawlessVNSS]

ok soo its been like forever since i did anything new to this tread, and after a while now ive been working on installing a 6spd manual into my SS had a few little minor set backs but its finally in
ill put up a few pic's and a bit more info once i have the time to do so

car use to have a 4sp auto

but now running a ls1 t56 6spd manual
hydralic clutch setup
VR Maloo 6 spd heavy duty clutch and chrome moly flywheel.
also running a shortened H patten ( Closer H pattern between 1st/3rd/5th )

cheers Adz

 

[FlawlessVNSS]

well not much of an update lately just getting this gearbox to work properly not wanting to disengage the clutch properly so waiting on some spacers to come to i can get the correct distances.
but for now ill throw up a couple of pics of the work i have done. hoping to have the car back on the road by end of the week if all goes good.

the box was in the car and running but didnt take any photos, but box is now back out for the spacers to get put it after that should be all sweet.

 

[FlawlessVNSS]

ok just a little update nothing to flash.
as some of you may know if you were at the last port Melbourne meet in VIC

my car wasn't there due to the head and manifold gaskets going. butt i managed to hitch a ride with Kcboye.

car was pulled down at the time but is now back together.

list of parts that were replaced

- all new ACL race series head gasket and up rebuild
- injectors
- rotor button
- dizzy cap
- all new water and vacuum through out
- new leads and plugs
- PCV valve

Cheerz Adz..