[LS2] L98 Roller Rockers?

[one_and_only2004]

Do they make roller rockers for the l98 V8's? I've read in places they do, then others they don't - I'm a bit confused really.

If the answers yes, are there any real gains?

 

[WogBoyz]

Yes yella terra do, they say about 10rkw or so depending on mods

 

[one_and_only2004]

So, pretty much a waste of time.

Thanks for the info.

 

[WogBoyz]

So, pretty much a waste of time.

Thanks for the info.

Yeah, there's a vcm cam u can combine them with for not bad gains, but better off spending less and just getting a better cam with better gains

 

[SirNemesis]

Yes they exist, although a bit hard to find on the YT website. Any rockers designed for offset valve heads (LQ4, L76, L98, LS3, L92) will work, but not much gain to had for the money.

 

[spanks]

For valve train geometry control,doubt that you could really go past this install.

PRI 2010: Jesel Custom Shop Turns Dreams Into Hardware - LSXTV.com

 

[Surfwagon]

Why have you included LS2 in your heading as the LS2 (same as LS1 and LS6, cathedral ports and straight rockers) and L98 (rectangle ports and offset rockers) use different heads and rocker systems.

 

[one_and_only2004]

Why have you included LS2 in your heading as the LS2 (same as LS1 and LS6, cathedral ports and straight rockers) and L98 (rectangle ports and offset rockers) use different heads and rocker systems.

MAYBE because I didn't know that?

 

[Green_Beast]

10kw doesnt sound worth to get...

 

[WogBoyz]

10kw doesnt sound worth to get...

Not really, but vcm make a cam that work with the rockers and depending on suporting mods can have decent gains, but bang for buck is just to get a nice size cam (nothing over the top big) and have better gains for cheaper