Leads on wrong

[sunshine the vu]

Hey guys last night me and a mate did my spark plug leads and put in some new bosch motorsport ones but i think we put some on wrong is there anyway to tell what spark plug leads go were as he removed all from from the drivers side and got them mixed up thanks

 

[vr304]

Coil packs should have the corresponding cylinder numbers written on them if they are the originals

 

[EYY]

Connect the end of each plug lead to each spark plug, and the corresponding coil terminals. If they're the coils are original they will have the cylinder number in white writing.

If not, use google images to see which terminal needs to go to each cylinder.

Number one is the one closest to the front of the car and number 6 is closest to the rear.

 

[sunshine the vu]

But dosnt the right length lead need to be on the right plug?

 

[Nut Kracker]

That's why you do 1 at a time
Anyway, here ya go......

 

[EYY]

But dosnt the right length lead need to be on the right plug?

The leads are usually numbered

 

[Nut Kracker]

If they are not numbered, just see which ones fit length ways to the corresponding plugs.
You'll soon see which ones fit where.

Or, if your old ones are numbered, just match your new ones to them,
and see above for the lay out.

 

[Immortality]

I always take off the old leads and then match up the new leads and number them

Technically, you only need to have the lead on one of the 2 posts on the correct coil