Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

level 3 cluster led replacement

Discussion in 'VN - VP Holden Commodore (1988 - 1993)' started by VPWAGZ, Jul 26, 2006.

  1. VPWAGZ

    VPWAGZ New Member

    Messages:
    291
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Mar 24, 2006
    Members Ride:
    vp vactioner wagon
    hey guys

    ive got a level 3 cluster out of a vq stato

    how do i replace the led's in the digital screens at the bottom??

    cheers
     
  2. HDT_aero

    HDT_aero Banned

    Messages:
    1,285
    Likes Received:
    8
    Trophy Points:
    0
    Joined:
    May 3, 2005
    Location:
    SA
    Members Ride:
    manual VN aero
    they are globes and if you pull the cluster apart you will see them in the rear pcb they cost about $60 from holden each and there is three or four of them but you cant get the globes anywhere else

    be carefull taking it apart and putting it back together as the plasic gets very brittle after 15+ years
     
  3. VPWAGZ

    VPWAGZ New Member

    Messages:
    291
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Mar 24, 2006
    Members Ride:
    vp vactioner wagon
    cheers mate
     
  4. HDT_aero

    HDT_aero Banned

    Messages:
    1,285
    Likes Received:
    8
    Trophy Points:
    0
    Joined:
    May 3, 2005
    Location:
    SA
    Members Ride:
    manual VN aero
    if you can be stuffed you can replace them with leds by soldering them with appropriate resistors straight onto the pcb
     

Share This Page