shane_3800
Well-Known Member
- Joined
- Aug 13, 2011
- Messages
- 4,223
- Reaction score
- 1,798
- Points
- 113
- Age
- 35
- Location
- places
- Members Ride
- vr commo
Hi all, I'm helping a mate, he has a VX LS1 4l60e, for street use and maybe some power cruise sort of stuff.
The trans has been upgraded with all the usual street stuff like transgo kit and corvette servo ect. It has a new standard stall converter and the engine is stock, but we're going to rebuild the engine and I'm going to add an upgraded cam. I was looking at a few cams.
I'm not too familiar with auto performance as I drive a T56 manual, I was looking at 3.7:1 diff gears and maybe a 2800 stall.
My options for standard stall are cams around the 215-220 intake and 220-23X sort of range.
Cams I'm looking at for a 2800 stall are around 220-23X intake and 24X exhaust so still fairly mildish at the bottom end of the range.
I've heard people say just go 3600 stall is this true?
The intake will be a FAST LSXR 102mm on stock LS1 heads CNC ported, so I have some room to play with in regards to cam selection.
Thanks.
Shane.
The trans has been upgraded with all the usual street stuff like transgo kit and corvette servo ect. It has a new standard stall converter and the engine is stock, but we're going to rebuild the engine and I'm going to add an upgraded cam. I was looking at a few cams.
I'm not too familiar with auto performance as I drive a T56 manual, I was looking at 3.7:1 diff gears and maybe a 2800 stall.
My options for standard stall are cams around the 215-220 intake and 220-23X sort of range.
Cams I'm looking at for a 2800 stall are around 220-23X intake and 24X exhaust so still fairly mildish at the bottom end of the range.
I've heard people say just go 3600 stall is this true?
The intake will be a FAST LSXR 102mm on stock LS1 heads CNC ported, so I have some room to play with in regards to cam selection.
Thanks.
Shane.