LS1 coil loom failure

[yamahahatim]

My vz ss crewman had had a slight random/ intermittently stuttering...
And blew a inj fuse,even bank....

Took some searching...
Fiddled and cleaned plugs, moved loom a little!! Got angry.... Swore lots....
Bingo...

Look what raised its ugly head...

 

[yamahahatim]

Posting to potentially save someone else heartache...

 

[Fu Manchu]

I looked at similar spots on the loom on mine when I cleaned it. Similar, as in how the wrapped wiring sat against hard edges etc. might go back and wrap some points in foam tape.
Good spot.

 

[yamahahatim]

So new coil harness arrived yesterday, I ordered a coil relocation set.... And
I've decided to not relocate the coils....
Standard position will do...
Removed the ugly split conduct, and wrapped in cloth electrical tape, looks better than original.....
(Fu manchu inspired!!!)

I had to de pin all coil plugs, 32 pins on the 8 plugs were all ass about....
All good now ....

So, coil relocation loom set, replaces factory loom.....
With a 2 spare extension bits left over.....
Hope this helps someone else in the future...