Ls2 6.0 Ltr V8 Engine

[Hoppy]

ITEM:
LS2 6.0 LTR V8 ENGINE

AS USED IN THE VZ SERIES COMMODORES


CONDITION:
THIS ENGINE IS A BRAND NEW CRATE ENGINE AND COMES COMPLETE WITH :

INLET & EXHAUST MANIFOLDS
FUEL RAIL & INECTORS
COILS, LEADS & PLUGS
WATER PUMP & FLEX PLATE
ELECTRONIC THROTTLE BODY
SALE IS FOR THE ENGINE ONLY

DOES NOT INCLUDE ENGINE HARNESS, STARTER MOTOR OR ALTERNATOR

REASON FOR SELLING:
Not Needed

PRICE AND PRICE CONDITIONS:
$6600

EXTRA INFO:
BUYER WILL HAVE TO PAY FREIGHT, I CAN ORGANISE FREIGHT, OR YOU CAN

LOCATION:
GERALDTON WA

CONTACT:
EMAIL TO [email protected]

PICTURES:

 

[vy_ss_on_20's]

Hey there just wonderin if the wiring harness in a vy with ls1 has the same wiring loom as the 6ltr's?

 

[Hoppy]

Not sure, probably not, the 6lt has a drive by wire throttle body, but you could change that. and some LS2's have the 54 tooth reluctors on the crank.
Hoppy

 

[Hoppy]

more info for you
Can't use LS1 computer must use E30 due to different crank/cam reluctor setup. Can't (to my knowledge) use a cable with the E38 ecu, may be possible but would depend if there is a model using that ecu and operating system that has a cable to use as a tune start point, would require modified operating system and retuning if possible. Can use LS1 ecu if change reluctor on crank and cam gear. Will also need to change injector plugs on loom.
I use EFI Live and regularly check Holden Crazy which is the tune file repository and have not seen a cable tune for the E38, there maybe a US model, sometimes the trucks ran cables later than the cars, perhaps an LQ9 operating system if one exists less fly by wire and retuned to suit.

Hoppy

 

[minux]

Is this actually an LS2 or is just a Gen 4 L76?

 

[Hoppy]

Well it seems I've been jipped, I was told this motor was an LS2, I have not had it out of the box till today and it seems I have an L76 not an LS2. Sorry for the claim that it was an LS2.

Hoppy

 

[DumpedVT]

so how much are you after for it now being an l76?

 

[Hoppy]

so how much are you after for it now being an l76?

I'd say $5500, Bargain
Hoppy

 

[minux]

Have someone who may be interested, but $5500 is quite high. Would you take 4?

Can pick up LS2 crates now for $4500.

 

[Hoppy]

Have someone who may be interested, but $5500 is quite high. Would you take 4?

Can pick up LS2 crates now for $4500.

Where can you buy an LS2 crate motor for $4500??,

If you have someone interested for $4000, do you think they would be better spending $500 more and getting the LS2??

Hoppy