Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Misfiring under load after a oil pressure switch problem

grim596

New Member
Joined
Nov 7, 2008
Messages
55
Reaction score
0
Points
0
Location
Bonnells Bay NSW
Members Ride
2010 3.0L TDi Colorado
Replaced the intake manifold gasket... was running beautifully for about 10 minutes, then the oil pressure switch came back on
:bang:
apparently it could be wet.... i'll look in the morning... couldn't be bothered right now i've just spent all day on it to have it stuff up again...

not misfiring anymore XD one plus, and the old gasket fell apart in my hands lol no wonder it wasn't running well

oh and then the check engine light came on
 

grim596

New Member
Joined
Nov 7, 2008
Messages
55
Reaction score
0
Points
0
Location
Bonnells Bay NSW
Members Ride
2010 3.0L TDi Colorado
guess what!!!

i couldn't take the idea that something was wrong so i went to the garage armed with a can of WD40 and my girlfriends hair dryier..... as soon as the hot air touched the il pressure switch... water started spyrting out of where the pins poke through... just got some paper towel and wiped it up... all fine now... why are the most annoying things so simple?

need that rubber ring that goes around the plug.... dunno how i lost it
 
Top