My ve SV6 cranks over doesn't fire without a petrol soaked rag in the throttle body

[Pauli1sv6]

I've had the keys replaced and programmed , replaced the fuel pump and still doesn't start normally or continue to run without the petrol soaked rag in the throttle body, wirring to fuel pump is good the fuel pressure at the injectors is correct and the filter is attached to the new pump replaced with the new fuel pump

 

[Fu Manchu]

Thought I replied to this?

If you are doing that, there will be lots of codes generated.
Not sure how you cam get it started like that, if so, MAF and TPS will be super upset and car will run like crap. codes will be generated.
Also opening the throttle manually can damage the throttle.

Get an OBD2 reader. Plug it in and connect to your phone with a diagnostic app like Dash Command and we can start to get somewhere.

 

[_R_J_K_]

Done any other diag? Did you replace the fuel filter when you did the pump? Other place to be looking would be the run of wiring to the pump to make sure it's not shorting and that the pump fuses are good.

 

[lout]

test the fuel pressure
then test the injectors are being pulsed
i assume you checked to see if the pump is getting power

 

[Pauli1sv6]

Thought I replied to this?

If you are doing that, there will be lots of codes generated.
Not sure how you cam get it started like that, if so, MAF and TPS will be super upset and car will run like crap. codes will be generated.
Also opening the throttle manually can damage the throttle.

Get an OBD2 reader. Plug it in and connect to your phone with a diagnostic app like Dash Command and we can start to get somewhere.

Not actually in the throttle body itself but in the induction pipe that leads to the airbox

 

[Pauli1sv6]

Done any other diag? Did you replace the fuel filter when you did the pump? Other place to be looking would be the run of wiring to the pump to make sure it's not shorting and that the pump fuses are good.

Filter is as part of the pump no shorts wiring fuses relay all ok

 

[Pauli1sv6]

test the fuel pressure
then test the injectors are being pulsed
i assume you checked to see if the pump is getting power

Did have a code shown up , injector circuit open it something or other along those lines, what does this mean?

 

[Pauli1sv6]

Did have a code shown up , injector circuit open it something or other along those lines, what does this mean?

Did have a code shown up , injector circuit open it something or other along those lines, what does this mean?

How do you test that the injectors are being pulsed?

 

[lout]

you can use a multimeter or a noid light