ari666
250,000 hits
- Joined
- Mar 10, 2009
- Messages
- 11,835
- Reaction score
- 128
- Points
- 63
- Location
- melbourne
- Members Ride
- 1966 impala, R32 GTR
now, go get yourself a hammer and dolly set and start hammering out those wheel arches.
doesnt take much effort to get it looking like this. just need to take your time. wire wheel off the entire bay. every trace of old paint gets zipped. the mark out all the holes you need and the ones you dont need. weld up the holes, tap out the dents, fill bog where you need to but try not to use too much. then plenty of hi-fill, then plenty of sanding, then plenty of colour/clear.
the days where you step back and look at bays like that make it all worthwhile.
doesnt take much effort to get it looking like this. just need to take your time. wire wheel off the entire bay. every trace of old paint gets zipped. the mark out all the holes you need and the ones you dont need. weld up the holes, tap out the dents, fill bog where you need to but try not to use too much. then plenty of hi-fill, then plenty of sanding, then plenty of colour/clear.
the days where you step back and look at bays like that make it all worthwhile.