My VS Cherry black tunnel rammed clubsport

[Cava454]

Way to big a manifold for motor and too big a cam for compression...

That's the same power as a tuned stocker with bolt ons.

Least it looks good.

 

[ward]

Power output at the moment doesn't worry me more glad that it drives ok took it for a drive on Monday and cruise around got a few looks which was good, even the police had a quick look as they drove past. Still need to sort a few more things with the manifold so I would rather have problems now then on a fresh motor. Will be interesting with more cubes and better compression how it will go.

 

[Demonica]

She's gorgeous. Jealous as hell with what you Tassie peeps can get away with down there.

 

[ward]

Got it out on the friday before drag day for a run and the gearbox decided to drop tranny fluid it must of had a big night lol, one of the cooler lines into the gearbox needs replacing as the thread looks burred and fitting is tight.

Also here a pic of a engine block I have deburred all the oil valley so shouldn't have issue with oil getting back

 

[blownute]

Love the look from the front mate looks very tuff

 

[ward]

Been a little while since i've done anything on the old girl
Got my diff done with 4.11 and minispool




Started pulling back exhaust system off and old tow bar that was on the car and getting ready to pull out old diff out and place in the new one

Also found taller filter insert's so will lift them and up another 50mm from what they are now

 

[ward]

Update finally got my 4.11 diff centre in
put some angles around my hole in the bonnet and got bigger filter's to poke up a little bit further
had two mechanical Iac motor's made


also did some more to my boot install

 

[ward]

G'day been awhile since i've been on hear the 4.11 and mini spool is in and have swap the turbo 700 for a full manualised turbo 400 and 3500 stall converter, had it retuned and it is spritey in first gear. B &m shifter and all new dash electrical gear will post some pics.

 

[Cava454]

Looks good. Should of made a drop down box for the shifter tho