NEED HELP PLEASE!, VX Supercharged ecotec into a manual VT

[AndrewRB30]

Hey everyone, pretty standard question so just wanting to know if anyone can help me out.

I have put a VX Supercharged ecotec into a manual VT, hooked it all up changed the ECU to the VX and it won't turn over, the transmission light has come on. Any help have I forgotten anything cheers guys.

 

[edals]

Pretty sure you need to link the body control module of the VT to the new Ecu with a tech 2.

 

[lowandslow]

The Super 6 was auto, yes? So your VX ECU is looking for a transmission that isn't there.
You need to link the new ECU with your current BCM or get VATS disabled. (Anti theft) and get the tune sorted out for a manual.

 

[SweetWagon]

Put your old PCM back in and just swap out the memcal..

 

[lowandslow]

Put your old PCM back in and just swap out the memcal..

His VT will have a flash based ECU not a memcal like the super 6's.

 

[SweetWagon]

His VT will have a flash based ECU not a memcal like the super 6's.

No it doesn't.. VT still has memcal.

 

[Immortality]

No it doesn't.. VT still has memcal.

Correct, VX was the first model (in the V6 range) with a flash based PCM.

The PCM will be the issue, as above, use your original VT PCM and get the memcal tune altered to suit.