sp001in
vyma100
heaps around but none in three gauge;
other items already out there:
this is what I have so far.
,
built using cardboard template, and body filler, still needs a lot of fine tuning. during my trial fit, notice the front left corner was not sitting square as the 3 guage holder had straightened the curved, used a heat gun to try shape and over cooked it. need to start base again. but it shouldn't take to much longer
other items already out there:
this is what I have so far.
built using cardboard template, and body filler, still needs a lot of fine tuning. during my trial fit, notice the front left corner was not sitting square as the 3 guage holder had straightened the curved, used a heat gun to try shape and over cooked it. need to start base again. but it shouldn't take to much longer