Panhard rod bushes

[StephenM]

I need new panhard rod bushes. Are the 2 piece ones OK. They would be easier to fit as I don't have a press. Any one tried them? https://www.ebay.com.au/i/131977352623?chn=ps
Thanks in advance.

 

[vc commodore]

I'm running them with my VC panhard rod for the past 10+ years....No issues what so ever

 

[Immortality]

Same here, run em for years without issue.

 

[vs-lover]

I'd personally buy the McKay rubber originals and they can be fitted by hand and require no press at all.

 

[Deuce]

Okay, I dont own a live rear end with panhard rod. But if it's anything like a shackle bush on an old leaf spring; a threaded rod, 2 nuts, a socket and washers. Then a spanner and a rattle gun to force it in there.

 

[Immortality]

It's similar but I'd go with the split bush, it's such an easy job once you get the old flogged bushes out.

 

[stick3]

i had nolathane 2 piece bushes they just crumbled after about 7 years fitted superpro bushes a few years ago i just used the bench vice to squeeze them using plenty of grease and a bolt, washer and soft rag
once you get them started they slide strait in

 

[Immortality]

Yeah I'd use superpro as well these days, went off nolathane years ago too.