Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Please help

tamaonekawa21

New Member
Joined
Jan 14, 2024
Messages
1
Reaction score
0
Points
1
Age
23
Location
Biloela
Members Ride
Vl walkinshaw
Hey guys I have a vl and I was just wondering if anyone would know how I can get the diagnostic codes or does anyone have a diagram of the codes or know where I can find one
 

ozNick

Well-Known Member
Joined
Dec 15, 2014
Messages
313
Reaction score
429
Points
63
Location
Canberra
Members Ride
VL Berlina 3.0 Auto
Do you mean the red and green LEDs on the computer?
 

VR38

Well-Known Member
Joined
Dec 23, 2008
Messages
3,099
Reaction score
40
Points
48
Members Ride
VB SL/E
surprised this is not stuck somewhere, is is easy enough to search...

Engine Control Unit Diagnostic Test
TO CHECK ERROR CODES:
1. remove screw retaining the passenger side kick panel
2. turn the diagnostic mode selector fully clockwise to diagnostic
3. start the engine and let it idle
4. watch the LED's flash (red and green), the red represents tens and the green represents ones (so if the red flashes twice and the green 4 times, thats 24). 14, 23, 24, and 31 should show
5. drive the car above 10km/h, this will cancel code 14
6. stop the motor and then turn the ignition to the on position
7. press the accelerator, this will cancel 23
8. put the car in neutral, then back into another gear, then back to neutral. this will cancel 24
9. turn the air con on, then off this will cancel 31
10. look at the codes that are now displayed, 31 means you dont have air con or its not working and 44 means your air con is working.
11. any other codes displayed besides this means there is a fault in that section
12. turn the diagnostic mode selector back full anticlockwise then turn the ignition off.
13. erase the memory by turning the ignition on, then moving the diagnostic mode selector fully clockwise for 2 seconds, then fully anticlockwise for 2 seconds. turn the key off and the memory is now cleared
CODES ARE:
11 Crank angle sensor circuit
12 Air flow meter circuit
13 coolant temperature sensor circuit
14 Vehicle speed sensor circuit
21 ignition signal circuit
23 throttle switch circuit
24 neutral switch circuit
31 satisfactory operation (non air conditioned models) air conditioner circuit (air conditioned models)
32 starter signal circuit
34 detonation sensor circuit (turbo models)
44 satisfactory operation (air conditioned models
 
Top