vlct400
New Member
- Joined
- Nov 19, 2005
- Messages
- 42
- Reaction score
- 0
- Points
- 0
- Age
- 38
- Members Ride
- VL Calais Turbo
Hey guys this is my 87' VL Calais Turbo. i got it stock and have done a few mods they are:
-Rebuilt RB30 with Wiseco forged pistons
-Block has been chemically cleaned, machined and blueprinted
-The crank, rods and cam are all standard but have also been chemically cleaned
-Stainless steel top mount manifold
-GT 35/40 700 HP Garrett internally gated turbo
-Stainless intercooler piping
-Stainless 4 inch dump pipe to 3 inch stainless exhaust with high flow cat and muffler
-044 Bosch Motorsport fuel pump
-SARD fuel regulator
-Sports steering wheel
-Pioneer head unit and speakers
-Autometer gauges(boost and air fuel ratio)
I have sitting at home some other parts to go on they are:
-MSD 6AL ignition module and coil
-Billet fuel rail and 6 550cc injectors
I am saving for other parts they are:
-Wolf 3D ECU and hand set
-RAJAB plenum
-Get the auto rebuilt with 3000 stall, stage 2 shift kit, B&M Proratchet Shifter
-And also get the diff ratios changed
-New suspension through out
-Darkest tint for the windows
-And a few more gauges like oil/water pressure
I will hopefully have the car done by the end of the year and am looking for around 400hp at the wheels.
Cheers daniel.:driving:
[IMG]
[IMG]
[IMG]
-Rebuilt RB30 with Wiseco forged pistons
-Block has been chemically cleaned, machined and blueprinted
-The crank, rods and cam are all standard but have also been chemically cleaned
-Stainless steel top mount manifold
-GT 35/40 700 HP Garrett internally gated turbo
-Stainless intercooler piping
-Stainless 4 inch dump pipe to 3 inch stainless exhaust with high flow cat and muffler
-044 Bosch Motorsport fuel pump
-SARD fuel regulator
-Sports steering wheel
-Pioneer head unit and speakers
-Autometer gauges(boost and air fuel ratio)
I have sitting at home some other parts to go on they are:
-MSD 6AL ignition module and coil
-Billet fuel rail and 6 550cc injectors
I am saving for other parts they are:
-Wolf 3D ECU and hand set
-RAJAB plenum
-Get the auto rebuilt with 3000 stall, stage 2 shift kit, B&M Proratchet Shifter
-And also get the diff ratios changed
-New suspension through out
-Darkest tint for the windows
-And a few more gauges like oil/water pressure
I will hopefully have the car done by the end of the year and am looking for around 400hp at the wheels.
Cheers daniel.:driving:
[IMG]
[IMG]
[IMG]