Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Project VEE EL

VL Berlina 5speed

Apprentice Panel Pusher
Joined
Oct 3, 2005
Messages
2,684
Reaction score
30
Points
0
Age
35
Location
Adelaide
Members Ride
Project VL Show car, VS Exec, VY Ute, YZ250F
yesterday i changed the main power branch off area around and ran the extra cable
no diffrence, selinoid on the starter just engages. no engine cranking.

so got frustrated with it and decided to change all the fuel pipes near the pimp with new pipe and clamps :)
one pipe later and fuel on my face i gave up,
started adjusting the panhard rod and got it pritty central

started raining so i had to leave the car
started sanding parts, got a bit done and tonight finished it for priming tommorow
spoke with my boss this morning and worked something out so that everything will be primed tommorow through work hours:D
at least it will be all done now, just sand all that and paint time


something might be happening this week also, ill keep it quite till it happens though;)



double checking ive got all my moulds
photo055ssss.jpg


photo070sssssss.jpg


photo069sssss.jpg
 

Bax

Projecting
Joined
Jan 9, 2004
Messages
3,502
Reaction score
37
Points
0
Age
40
Location
QLD
Members Ride
Nothing
Not sure if you'll run into troubles, but you may have to slide your panhard rod back to the left a touch I believe. Depends how much room you have, under hard acceleration the whole rear section jumped slightly right and scrubbed. I think it was right anyway.

Depends what rubber you're running, but if it's central with a good offset you shouldn't have troubles.
 

vy_ss

New Member
Joined
Mar 22, 2007
Messages
22
Reaction score
0
Points
1
Location
woodcroft
Members Ride
vy ss hbd with a sunroof :)
yesterday i changed the main power branch off area around and ran the extra cable
no diffrence, selinoid on the starter just engages. no engine cranking.

so got frustrated with it and decided to change all the fuel pipes near the pimp with new pipe and clamps :)
one pipe later and fuel on my face i gave up,
started adjusting the panhard rod and got it pritty central

started raining so i had to leave the car
started sanding parts, got a bit done and tonight finished it for priming tommorow
spoke with my boss this morning and worked something out so that everything will be primed tommorow through work hours:D
at least it will be all done now, just sand all that and paint time


gee that sound familia wasent it walk left then streight then trip ova?????
what hapening ?????? tel me or ill find more scratches lol :) pleasssse:bow:

something might be happening this week also, ill keep it quite till it happens though;)
 

VL Berlina 5speed

Apprentice Panel Pusher
Joined
Oct 3, 2005
Messages
2,684
Reaction score
30
Points
0
Age
35
Location
Adelaide
Members Ride
Project VL Show car, VS Exec, VY Ute, YZ250F
Not sure if you'll run into troubles, but you may have to slide your panhard rod back to the left a touch I believe. Depends how much room you have, under hard acceleration the whole rear section jumped slightly right and scrubbed. I think it was right anyway.

Depends what rubber you're running, but if it's central with a good offset you shouldn't have troubles.

yer i was looking into that also, had two people jump in the back once i centred it and relised it did drop to the right
so ill have to work it out a little

yesterday i changed the main power branch off area around and ran the extra cable
no diffrence, selinoid on the starter just engages. no engine cranking.

so got frustrated with it and decided to change all the fuel pipes near the pimp with new pipe and clamps :)
one pipe later and fuel on my face i gave up,
started adjusting the panhard rod and got it pritty central

started raining so i had to leave the car
started sanding parts, got a bit done and tonight finished it for priming tommorow
spoke with my boss this morning and worked something out so that everything will be primed tommorow through work hours:D
at least it will be all done now, just sand all that and paint time

something might be happening this week also, ill keep it quite till it happens though;)


gee that sound familia wasent it walk left then streight then trip ova?????
what hapening ?????? tel me or ill find more scratches lol :) pleasssse:bow:
lol that was gold, took way longer then when my tank went in:p
memories:yeah:


ill pop around in 5 too see you and the girls

lets just say
i bought 5ltrs of clear today, another $330 there..... although it was $461 :D
and all my parts are primed and ready for rubbing

photo072sssssss.jpg


photo073sssss.jpg
 

VL Berlina 5speed

Apprentice Panel Pusher
Joined
Oct 3, 2005
Messages
2,684
Reaction score
30
Points
0
Age
35
Location
Adelaide
Members Ride
Project VL Show car, VS Exec, VY Ute, YZ250F
nothing much ;)
 

Zeussy

SSM11K
Joined
Dec 26, 2008
Messages
1,298
Reaction score
14
Points
38
Location
Central Coast
Members Ride
Gen-F Clubsport, Rodeo 2.8 TD 4x4
You're not are you??
It doesn't need it?!!

lmao,

It'l look kick arse but...:w00t:

If its what ima thinking...



Was just looking at your body panels/bumper bars in primer, again, and dayyyuuummm I wish I could spray paint properly :cry:

A mate of a 'mate', ran into me today, apparently this 'mate' was asking him how much to do some painting for me, long story short he said $1000 for a doors shut respray + paint.. If I get it in 2 pack primer ready for him to do the final block back...

Now thats probly a good price, but I aint quite got that much, lol,
Just wish I could do it my self, try and save some cash...

End of rant/sook...:p
 

VL Berlina 5speed

Apprentice Panel Pusher
Joined
Oct 3, 2005
Messages
2,684
Reaction score
30
Points
0
Age
35
Location
Adelaide
Members Ride
Project VL Show car, VS Exec, VY Ute, YZ250F
what do you think im going to be doing?

Just wait till sunday and you shall see what i was thinking :)
 
Top