removing harmobic balancer

[robbhibb]

the ute is still not going. I went and bought a puller new cas and some bolts to suit but when I tried to remove the balancer one of the threads stripped any ideas. I've sprayed the crap out the shaft with Inox before I even tried removing the balancer

 

[supercharged-ride]

thread on the bolt or in the harmonic balancer??
If its the bolt, did you buy high tensil bolts?
If it is in the balancer you would probley have to tap the next size thread up and get another bolt to suit that thread

 

[greenacc]

Can you use a 3 jaw puller on the outside of the balancer instead?

 

[Tonner Matt]

If you have stripped one of the threaded holes in the balancer, the only way I can see you getting it off now is with one of these:
G & G Technics Pty Ltd .. Innovative Automotive Tools & Equipment
Bursons usually have these in stock. Not sure about Repco though
They aren't cheap, but top quality tools never are

 

[robbhibb]

Had a day of for a change got a noid light have no injector pulse or spark