Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Removing mudflaps

impulsive

Alloytec Racing
Joined
Aug 29, 2007
Messages
1,872
Reaction score
20
Points
0
Age
38
Location
Brisbane, QLD
Members Ride
VZ Alloytec
get some plugs at sca, like the ones people get to cover up there spoiler holes. I havent had mine for years, nor can i remember where to holes are but im sure its pretty obvious and you will have no trouble, turn the screw driver anticlockwise and you should be set
 

richardpalinkas

Blown Alloytec
Joined
May 4, 2009
Messages
2,290
Reaction score
16
Points
38
Location
Gold Coast
Members Ride
Raptor Impulse VZ SV6
the screws are inside the wheel arch, no need to worry about them. they cant be seen
 

Boneyards

New Member
Joined
Mar 13, 2013
Messages
18
Reaction score
0
Points
0
Age
34
Location
Hampton Park, VIC
Members Ride
01' VX Acclaim Wagon
Going to do this tomorrow, not fussed on screw holes though.
Can it be done at stock height with 17's.. I mean, without removing the wheels?
 

PHaSR

New Member
Joined
Mar 2, 2012
Messages
97
Reaction score
1
Points
0
Location
St Andrews
Members Ride
VZ LUMINA
I reckon unless you are lowering or putting bigger wheels on, then leave them on.(especially if it is a darker model.) I really think it takes away from the look, unless you have it dumped in the weeds or run 20inch rims.
 

King diddy calais

New Member
Joined
Dec 5, 2011
Messages
150
Reaction score
3
Points
0
Location
S.E Vic
Members Ride
Vz Calais 05 Alloytec 190 with a secret mod
I had to remove mine, they kept scraping speed humps, it's not that low either. 18" inch wheels with super lows all-round.
 

RiCeY

F O R U M W A R R I O R
Joined
Mar 29, 2005
Messages
4,126
Reaction score
492
Points
83
Location
Australia
Members Ride
VZ SV8 6spd 6.0 430rwhp
Theres one screw that goes through the sideskirt if they are moulded mudflaps.

I had to remove mine due to constant scraping and it left a hole. car is black so its barely visible.
 

MiKExAUS

Member
Joined
Jul 13, 2011
Messages
296
Reaction score
13
Points
18
Location
Sydney NSW
Members Ride
VX SS A4 Series II
leaves one hole. just buy some touch up paint and put some on it then it will look mint :)
 
Top