Reverse Sensors

[Wongy295]

You need to remove all the trims in the boot starting with the hard plastic one that sits at the rear under the bootlid.

Then the carpeted trims by removing the push in clips.

Did you try what I posted?

As soon as I get home from work tomorrow, I'll pull the boot apart looking for something...
What's the bet I got Jewed and the sensors aren't connected to anything...FML

 

[RiCeY]

Its very unlikely anything has been disconnected.

Most likely the plug itself which you seem to be ignoring and its the easist to check.

 

[Wongy295]

Its very unlikely anything has been disconnected.

Most likely the plug itself which you seem to be ignoring and its the easist to check.

Apologies. I seem to have missed that part. I'll do that before ravaging the boot lining.

 

[Supe]

Does the sound on the integrated units with the colour display screen come out of the speakers or still a separate speaker unit, could it be possible the volume has been turned down on the head unit just like when using bluetooth?

 

[Wongy295]

Ricey! You are a God amongst men.

I opened the trailer lights connecter and this bad boy fell out. Jammed it back in the slot, started the car, put it in reverese...and presto! Two beeps.

Thanks everyone! <3

Sent from my GT-I9100 using Tapatalk

 

[CAPRILICIOUS WL]

Iv got a similar problem but with my front sensors.

Iv got the WL caprice with front and rear sensors.
My rear sensors are fine but my front sensors don't beep at all.

The park assist button near the power window buttons is turned on, and Iv also checked that the wiring underneath the front bar is connected and has a voltage.

Can anyone please guide me to where I may find the speaker or buzzer or fuse for the front sensors.