Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

steering rack boots

dannyn12

New Member
Joined
Feb 4, 2009
Messages
69
Reaction score
0
Points
0
Members Ride
vx supercharged
just a quick question can you change the steering rack boots without taking off the steering ties,thanks in advance
 

accentstencil

Well-Known Member
Joined
Jun 30, 2005
Messages
8,376
Reaction score
587
Points
113
Age
71
Location
Caboolture South, QLD
Members Ride
WH II Caprice, 5.7 2018 Equinox LTZ V
You will need to remove the tie rod ends. It's not very difficult to do yourself.
 

SweetWagon

booosted
Joined
Jan 27, 2006
Messages
2,139
Reaction score
19
Points
38
Age
35
Location
Springwood NSW
Members Ride
VS Berlina Wagon Supercharged
just a quick question can you change the steering rack boots without taking off the steering ties,thanks in advance

Yeah the tie rod ends have to come off in order to slide the new boots on, count the number of turns it takes when taking it off, so when you re-assemble you can get the alignment pretty close by putting it back on the same amount of turns. But get a wheel alignment done ASAP.
 

dannyn12

New Member
Joined
Feb 4, 2009
Messages
69
Reaction score
0
Points
0
Members Ride
vx supercharged
thanx guys is there a special tool required to remove the tie rod end?
 

lumina01

New Member
Joined
Dec 3, 2006
Messages
427
Reaction score
2
Points
0
Location
Melb
Members Ride
MY10 SSV UTE
...

changed mine sometime last year and added these heat shields on them
332262133.jpg

these are the pacemaker brand ones, most ppl using the difillippo ones say there noisy.
im sure i have photo's of them fitted, ill have a look later on
 

dannyn12

New Member
Joined
Feb 4, 2009
Messages
69
Reaction score
0
Points
0
Members Ride
vx supercharged
when removing the ball joint can you mark the nut and the thread in is orginal position with a marker
 

accentstencil

Well-Known Member
Joined
Jun 30, 2005
Messages
8,376
Reaction score
587
Points
113
Age
71
Location
Caboolture South, QLD
Members Ride
WH II Caprice, 5.7 2018 Equinox LTZ V
thanx guys is there a special tool required to remove the tie rod end?
I bought a tie rod end remover from Supercheap. I can't remember the price but I think it was cheap. You can remove them without the tool but the tool causes no damage.
 

accentstencil

Well-Known Member
Joined
Jun 30, 2005
Messages
8,376
Reaction score
587
Points
113
Age
71
Location
Caboolture South, QLD
Members Ride
WH II Caprice, 5.7 2018 Equinox LTZ V
when removing the ball joint can you mark the nut and the thread in is orginal position with a marker
You don't need to remove the ball joint but you can mark the thread on the tie rod.
 

Clivevt5.0

New Member
Joined
May 22, 2017
Messages
23
Reaction score
0
Points
1
Age
32
Location
Perth
Members Ride
97 Vt 5.0 S1 ex police
...

changed mine sometime last year and added these heat shields on them
332262133.jpg

these are the pacemaker brand ones, most ppl using the difillippo ones say there noisy.
im sure i have photo's of them fitted, ill have a look later on

Where could I buy these from, searched eBay and no luck
 
Top