Stupid brake rotors!

[KB3800]

Glad you found a workshop that didn't charge a fortune for the work. But I must agree with Calaber, its worthwhile now taking the discs off and cleaning the mating surfaces, and while grease will work I'd recommend an anti sieze compound. Had the same issue on my old VP and similar result.

 

[scarp57]

Just changed the Disc's on my WK Stato had the same prob, was not sure whether to belt them or not, once again this forum came to the rescue, suffice to say job done & all is well
Thanks guy's & gals

 

[shaggerz]

I had same problem on my VS - the trick is to belt them hard with hammer once, then rotate a quarter turn, and repeat about a hundred times until the rotor comes off. I did ruin a hammer this way because I was hitting so hard though - needless to say if you have to remove the rotors this way they will be rooted and need to go in the bin.

 

[vt s]

maybe just hit it on the other side?
idk maybe you did that but yea happens to allcommodores.
First most noticable when even the whole wheel is a prick to get off.