V1P_COMO
New Member
- Joined
- Sep 1, 2005
- Messages
- 11
- Reaction score
- 0
- Points
- 0
- Members Ride
- VP Commodore
hey, i just recently put a V8 throttle body on my vp v6 and also removed my
bellmouth restrictor out of my manifold adaptor. now there is a very high
pitch whilstle coming from the throttle body area, my idle is higher than usual
and my throttle is sticking slightly. i have checked all my vacum lines and
none are makin the noise so i am wonderin if the noise is because of the
bellmouth removal? i also noted that when switching the throttle positioning
sensor, the butterfly went from fully closed to open by about 2 mm, is this
what is causing the higher idol or should i adjust the idle screw? anyhelp at
all will be highly appreciated, cheerz!
bellmouth restrictor out of my manifold adaptor. now there is a very high
pitch whilstle coming from the throttle body area, my idle is higher than usual
and my throttle is sticking slightly. i have checked all my vacum lines and
none are makin the noise so i am wonderin if the noise is because of the
bellmouth removal? i also noted that when switching the throttle positioning
sensor, the butterfly went from fully closed to open by about 2 mm, is this
what is causing the higher idol or should i adjust the idle screw? anyhelp at
all will be highly appreciated, cheerz!