Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

T56 manual VT 2JZ Single turbo conversion

Claudy

French Com
Joined
May 12, 2006
Messages
450
Reaction score
5
Points
18
Age
37
Location
Perth, Two Rocks
Members Ride
Manual Gen3 VT SS + V6 VT manual turbo
Sploink.....

nice work mate. lookin' forward to see the finish result. Then again... do we ever truly finish these projects?
Haha that's true, but this will get finished in time... Haha
 

Claudy

French Com
Joined
May 12, 2006
Messages
450
Reaction score
5
Points
18
Age
37
Location
Perth, Two Rocks
Members Ride
Manual Gen3 VT SS + V6 VT manual turbo
Started doin some of the fusebox relocating after finally deciding I was gonna put it all under the steering wheel :) took the original mini fuse and relay board bracket out:
IMAG1926.jpg

Cut it all up and retacked it so the board sat as high as possible to give room for the other fusebox:
IMAG1935.jpg

This is what it ended up lookin like once mounted:
IMAG1938.jpg

And this is with other spare one I had from another VT so that I can solder all the orignal wires to one by one:
IMAG1954.jpg

Making sure theres enough room with the cover on:
IMAG1953.jpg

And now the fun begins haha:
IMAG1955.jpg


IMAG1970.jpg
 

Claudy

French Com
Joined
May 12, 2006
Messages
450
Reaction score
5
Points
18
Age
37
Location
Perth, Two Rocks
Members Ride
Manual Gen3 VT SS + V6 VT manual turbo
Hey guys! So not too much being happening with the build, pretty busy at work and doing house stuff... but started gettin back into it now! I kept a rear cradle out of a VY I was wrecking so gave it a quick clean a respray and currently changing all the bushes while it's out of the car haha





Also cut out the spare wheel well to make room for the fuel cell :)



Bought a VZ SS aluminium radiator and twin thermo fans, making a shroud for it at the moment.




Started to make up the new headlight & indicator loom which is gonna run up behind the drivers side guard into the can to where I relocated the fusebox



And also scored these pretty cheap do couldn't resist ;)

 

Claudy

French Com
Joined
May 12, 2006
Messages
450
Reaction score
5
Points
18
Age
37
Location
Perth, Two Rocks
Members Ride
Manual Gen3 VT SS + V6 VT manual turbo
Finished making the frame for the cell


Nutserted the frame in ( ppl reckon I need to weld the frame in, but I think 8 x M6 bolts will be more than enough )




Taaadaaa


Now just need to get an ali plate to cover the floor and that'll be done :)
 

Claudy

French Com
Joined
May 12, 2006
Messages
450
Reaction score
5
Points
18
Age
37
Location
Perth, Two Rocks
Members Ride
Manual Gen3 VT SS + V6 VT manual turbo
Jxw that's killer! It would stiffen it right up ay
 

Claudy

French Com
Joined
May 12, 2006
Messages
450
Reaction score
5
Points
18
Age
37
Location
Perth, Two Rocks
Members Ride
Manual Gen3 VT SS + V6 VT manual turbo
Painted up the rear arms and fitted the bushes today


 

vtgas

New Member
Joined
Sep 2, 2015
Messages
3
Reaction score
0
Points
1
Location
Adelaide
Members Ride
2000 vt commodore
Hello,
When doing your vt turbo project you blocked the pvr
valve, where there any problems with this? Did you for example drill
a hole in the oil filler cap to vent any pressure to atmosphere?
 

Claudy

French Com
Joined
May 12, 2006
Messages
450
Reaction score
5
Points
18
Age
37
Location
Perth, Two Rocks
Members Ride
Manual Gen3 VT SS + V6 VT manual turbo
Vtgas blocked PCV valve yer and I vented the lower intake manifold barb fitting to a catch can and yer drilled and tapped the filler cap and ran 5/8 line to catch can too
 
Top