Mickey Maj
VLT RB30DET
- Joined
- Aug 20, 2005
- Messages
- 37
- Reaction score
- 0
- Points
- 0
- Age
- 36
- Members Ride
- VL Commodore
if you are keen on the VR/VS suspension setup then i might possibly suggest using the aftermarket adjustable top strut mounts as were used in the build up of VU for U (ute)by street machine magazine. in the later model commoderes they did away with the strut mount like the VS where it's bolted in with 7 or 8 bolts and they spot welded the strut mounting cup directly onto the strut tower. in the later model commodores they drill out the spot welds, drill 3 holes to suit the adjustable strut mount and he presto the job is done. i bleieve the 3 mounting bolts are the same as the VB-VP strut towers etc so should go straight in.
The adjustable strut tops you hav mentioned sounds like a good idea, i shall look into that.:thumbsup: