VB wiring

[Beau308]

hey fellas just wondering if i was to buy a 308 original loom off ebay will it pug in to the 6cyl connector at firewall as im converting to 308
Cheers

 

[Smitty]

no....

 

[Beau308]

no....

Well that's not very good then is it
What ya recon change plug or re wire it

 

[the_boozer]

rewire extend a few wires and the 6 loom will work not much electrics on the ole blue motor if the vb originally had a points distributor you'll need to get rid of the resistance wire , rewire the coil positive amusing your going to use an electronic distributor,

 

[Fachoo]

Well that's not very good then is it
What ya recon change plug or re wire it

I recon change male female plug

 

[sire01TMK]

no....

That's what I did when I converted the VK from 6 to 8 and it works fine

 

[Beau308]

That's what I did when I converted the VK from 6 to 8 and it works fine

Is it same colour wiring if I change plug for the most of it ??

 

[sire01TMK]

Is it same colour wiring if I change plug for the most of it ??

Yeah, basically all you need is green for temp sensor, blue for oil pressure, brown for charge light from alternator and make sure you bridge the yellow & pink wires from ignition to make sure you always have 12v for high energy ignition coil.

 

[Beau308]

Thanks mate to easy by the sounds of it

 

[sire01TMK]

Thanks mate to easy by the sounds of it

Very easy