ve series 2 reverse camera

[doubledip]

to get reverse camera enabled any holden dealer can do it - trust me if they say they cant then go to another - if that fails then send the silver box t me and I will enable it - sat nav you need to replace the whole box purely because you cant buy the nav board as a separate item over the counter -

 

[doubledip]

or if you have this

 

[bigcheesoli]

Sorry, know it's an old thread, but did you find out how to get rid of the factory guidelines on the reversing display? Have just installed a camera and have the same issue of two sets of guidelines. Cheers.

 

[bluejamieb70]

Just had a reverse camera fitted to my series 2 VE sedan yesterday via IQ system by City Holden in Adelaide (ask for Craig Delaney who was most helpful or Marc in service) for about $500. All genuine and I couldn't be happier!

 

[Parkbeach]

Please, can you tell me what these cable colours are? Don't want to cut anything until I'm sure about what I'm doing.

 

[Parkbeach]

Please, can you tell me what the cable colors are for the camera?

 

[doubledip]

OK, so I installed the camera, 12v off reversing lights circuit and hooked up the positive of the rca to pink and the negative to the blue. Took the car to Holden and they enabled the equipped option for the camera but it hasn't shown up. Was there anything else to do? It's a ve series 2 sportwagon

earth? did you connect one?


what shows up... just black screen?

do you have the video plug in the side of the unit?

 

[sjp770]

There was a red cable on the rca cable but I didn't connect it. When I say 12v circuit I hooked up positive and negative.

The dash is still only showing the reverse sensors.

 

[doubledip]

go into the config page and the last tab is camera go in there and turn on the camera

 

[sjp770]

Nope, no camera option. I was expecting to have an option between park assist or camera. I haven't pulled off the dash to check for the video plug on the side.