ve ssv 19x8 wheels on a series one vt

[GR3GA]

mine were already machined, you do it with a dremel if your game, i had no problems

 

[lukey92]

So I have to buy lower profile tyres?

 

[Drewie]

What's the go with wheel nuts for these wheels, the VE's have thicker studs than the earlier cars and because of this the holes in the wheels are larger than the pre VE wheels, can you buy nuts that have the larger taper to suit the holes in the VE wheels but with the smaller pre VE threads. I don't know if I would be happy using the smaller nuts from the pre VE wheels in case they did not have enough contact area to hold the wheels securely, might be ok for a while but long term who knows. They do look good though.

 

[Delish-VY]

good luck..VE wheels dont bolt up to any previous models
without some serious mods... Even the bolt/stud holes are the wrong size

get some good advice first

...as everybody else said, they will go straight on you just need to bore the center, tyre places do it all the time now because VE wheels are very popular...should be a pretty quick and painless procedure time/money wise.

 

[GR3GA]

So I have to buy lower profile tyres?

dont have to but id recommend it