VE SSV VCM OTR extras

[MITCHSSV]

Hey guys,

I'm looking at getting a VCM OTR from Revhigh and I'm just wondering if I need to get the infill panel and fascia panel as well?

https://www.revhigh.com.au/product-page/holden-vcm-ve-vf-6-0l-otr-ls2-ls3-l98-l77-l76-v8

The engine is currently stock and I'm looking to get a bit more out of it.

Cheers

 

[lmoengnr]

The infill panels are just for looks when the bonnet's open.

 

[dazzdodge]

Yeah you don’t NEED to get them, just depends on the look you are after, I prefer mine without the infill panels

 

[lazyc]

Infill for airbox is nice. It gives it a factory look

 

[dazzdodge]

yes, did fit that one but not the top ones either side of the OTR

 

[MITCHSSV]

Thanks for the responses.
Another question is whether I want Maf or Mafless?
Also am I needing to get a tune if I fit this?

 

[vr304]

Maf in is ur best bet if you go mafless u most definitely need a tune as it does away with the air flow sensor and operates only on the map (manifold absolute pressure) sensor readings instead of both maf and map, mafless has a slight advantage overall horsepower wise although it also has the downfall of loosing the computers self learning abilities with fuel trims etc, as for needing a tune with your vcm otr it would be beneficial but possibly not 100% necessary

 

[MITCHSSV]

Maf in is ur best bet if you go mafless u most definitely need a tune as it does away with the air flow sensor and operates only on the map (manifold absolute pressure) sensor readings instead of both maf and map, mafless has a slight advantage overall horsepower wise although it also has the downfall of loosing the computers self learning abilities with fuel trims etc, as for needing a tune with your vcm otr it would be beneficial but possibly not 100% necessary

Thanks heaps for the info