VF2 Redline Footwell and Puddle lights

[mbiondo]

I'm toying with the idea of installing some front footwell lights and front door puddle lights onto my Redline. The cutouts are there so why not. Now, I've tried searching on this forum for a guide on how to do this, but can't seem to find one. I'm meant to tap into the dome light wiring, but don't where to locate the appropriate wire. Has anyone done this recently and have some pics of where and which wire I should tap into?

Many thanks

 

[stooge]

See if this helps

https://forums.justcommodores.com.au/threads/how-to-install-leds-in-footwell-of-ve-commodore.144939/

Ve is pretty much the same as vf

 

[Anthony121]

I used one of the computer connectors and taped into the roof for my footwell lights. ATX connector? I also added a map reading light for rear passengers too.

 

[stooge]

ATX connector? .

Probably a 4 pin molex connector.

 

[Anthony121]

Probably a 4 pin molex connector.

yes that's the one

 

[mpower]

maybe the one in the little compartment in the center console?? do a writeup if you do go ahead and do it all for future reference.