enhancedss
New Member
- Joined
- Jun 30, 2005
- Messages
- 519
- Reaction score
- 1
- Points
- 0
- Location
- SA
- Members Ride
- VE R8 LS3, VYSS Ute 10.0@146MPH & VYSSTT 525rwkw
id start of by doing this.
fir oil catch can for blowby, this is the cause for 90% of the problem, the other is the turbo seal.
fit catch can, remove piping eg intercooler and clean, and refit and see how it all goes from there.
The bleeder valves all have holes there, leave it dont worry about it.
just make sure when u fit the catch can system, u do it correctly as ive seen so many people have running problems after, when your ready send pic and ill describe what to do.
fir oil catch can for blowby, this is the cause for 90% of the problem, the other is the turbo seal.
fit catch can, remove piping eg intercooler and clean, and refit and see how it all goes from there.
The bleeder valves all have holes there, leave it dont worry about it.
just make sure when u fit the catch can system, u do it correctly as ive seen so many people have running problems after, when your ready send pic and ill describe what to do.