Vl won't start

[vxS2000]

Bought a vl the other day with a rb30, got a second hand dizzy from a wrecker and a new air flow meter, still cant get it to start got fuel pressure ??? Any ideas?

 

[detox_nath83]

Yeah do a search there are millions of pages
On the same thing your experiencing.

 

[DAVO84]

did you put your dizzy back in right you could have it 180 out, does it have spark? if not check the plugs, leads, ignition coil,CAS is it cranking when you try to start it or do you get nothing?

detox_nath83 is right there are heaps of threads, just type in what your problem is up in the top right

 

[vxS2000]

Yeah it winds over fine just wont start, I have power to the coil and the coil is fine, I have tested it but there is no spark

 

[87RB30VL]

We need a section in this forum of all the "My VL won't start" threads for people to look over before making a new one lol.

Check your ecu codes bro, are you sure the dizzy you got wasn't rooted before you got it?

CODES ARE:
11 Crank angle sensor circuit
12 Air flow meter circuit
13 coolant temperature sensor circuit
14 Vehicle speed sensor circuit
21 ignition signal circuit
23 throttle switch circuit
24 neutral switch circuit
31 satisfactory operation (non air conditioned models) air conditioner circuit (air conditioned models)
32 starter signal circuit
34 detonation sensor circuit (turbo models)
44 satisfactory operation (air conditioned models)

 

[detox_nath83]

thats your crank angle sensor... which is inside the dizzy..

my how too change the cas is below in my sig